Top Quality Notes About Troubleshooting The Heat Pump Problems

Friday, January 29th, 2010 at 8:51 pm

Is your heat pump in a need for repair? Are you facing heat pump problems? If yes, then go thru this article to comprehend the tips for troubleshooting heat pumps.

Heat Pump Problems : troubleshooting the heat pump
Heat pumps are the mechanical devices that are configured for transferring heat from one location ( source ) to another ( sink ). In most of the cases, heat pumps draw heat either from the atmospheric air or from under the Earth’s surface. The former type is named air source heat pump, while the latter machinery is called geothermal heat pump. Heat pumps serve for both cooling and heating the home in extreme environmental conditions.

The technology of heat pump is employed in some home appliances such as heating system, freezers and air conditioners. A heat pump works by consuming a touch of energy for transferring heat from an area with low temperature to another with a higher temperature. It is more energy efficient in comparison to heating and cooling devices like furnaces and ACs. Nonetheless like other machinery, there are certain heat pump issues, that might arise over a time period. Let’s debate in detail about troubleshooting heat pumps.

Troubleshooting Heat Pump Problems

A short information about the parts of a heat pump will help in a simple diagnosis of the heat pump issues. The basic parts include an evaporator ( circulating fans ), reversing valve, condenser ( chiller coil ) and a compressor. Previous to starting with heat pump troubleshooting, switch off the power supply at the main circuit breaker. Following are some of the common heat pump Problems and ways to troubleshoot them :

No Heat Production : If there is not any heat production, then the problem may be because of failure in the main power supply or overloading of the motor. In order to troubleshoot this malfunction, check the power supply and thermostat and fix them ( if necessary ). In case there’s power supply, reset the motor by pressing the reset button. Also, check the ignition of the heat pump for any defects. If none of these tips work, then you can hire a professional for correct fixation.

Inadequate Heat Production : insufficient heat production is one of the major heat pump issues. In most cases, it is caused due to obstructions in the air ducts. Other reasons for this defect may be low thermostat setting and presence of dirt in the air filters. You can check these systems whether or not they are functioning properly or not.

High and low Head Pressure : A heat pump issue with low head pressure can be due to a scarcity of refrigerant, damage of the compressor and soiled evaporator. On the contrary, high head pressure frequently results from overfeeding of the refrigerant and soiled condenser. Keep an eye on these systems and recheck whether the heat pumps start working normally or not.

Freezing of Heat pump : Freezing of the heat pump unit may be caused thanks to a faulty air blower or accumulation of dust and dirt in the filters and evaporators. For fixing this problem, check for the defrosting option in your heat pump unit. If there’s, you can defrost it and check the compressor for any defects. Do not forget to check the calibration of the thermostat.

Loud Heat Pump : noisy working of the heat pumps is caused because of the reasons like loose screws, improper fixation of the belts and noise from the air ducts. To correct and troubleshoot this malfunction, you can tighten the screws, check the belts and introduce a plastic insulation inside the metal air ducts.

Share and Enjoy: